The physical size and power requirements are relatively nominal and are shown below:
Moisture Analyzer
Physical Properties and Utilities
Physical Information
Dimensions with gas cell
- Length - 39 inches
- Width - 23 inches
- Height - 10 inches
- Weight - 200 pounds
Gas Cell
- Pathlength 6.1 meters
- Volume 0.5 liters
- Materials 304 stainless steel on all wetted materials by sample gas
- Windows KBr (potassium bromide) 25x 4 mm
- Conflat seals between metal-metal flanges
- Viton O-rings between window and metal cell
- Inlet/outlet 1/4 inch VCR male fittings, stainless steel, welded to flange
Power Requirements 110 volt, 6.5 amps serge on start up Details of power requirements FTIR power supply
- 35 watts steady state power drain
- 110 volts 1.3 amperes maximum serge at start up
Gas cell heater blanket 110 volts, 4.6 amperes Maximum (high temperature cut-off) Controller electronics 110 volts, 0.6 amps Maximum output from controller possible - 110 volts, 10 amps TE-Cooled MCT Detector
- 110 volts, 0.5 amps maximum serge on start up supply provides
- 9 volts, 3 amps, 27 watts steady drain
F2 Impurity Analyzer
Physical Properties and Utilities
Physical Information
Dimensions with gas cell
- Length -39 inches
- Width - 23 inches
- Height - 10 inches
- Weight -200 pounds
Gas Cell
- Path length 1.9 meters 6.1 meters set in steps of 0.5 meters
- Volume 0.5 liters
- Materials 304 stainless steel on all wetted materials by sample gas
- Windows CaF2 25x 4 mm
- Conflat seals between metal-metal flanges
- Â Teflon O-rings between window and metal cell
- Inlet/outlet 1/4 inch VCR male fittings, stainless steel, welded to flange
Power Requirements 110 volt, 6.5 amps serge on start up Details of power requirements FTIR power supply
- 35 watts steady state power drain
- 110 volts 1.3 amperes maximum serge at start up
Gas cell heater blanket
- 110 volts, 4.6 amperes Maximum (high temperature cut-off)
Controller electronics 110 volts, 0.6 amps
- Maximum output from controller possible - 110 volts, 10 amps
TE Cooled MCT Detector
- 110 volts, 0.5 amps maximum serge on start up supply provides
- 9 volts, 3 amps, 27 watts steady drain
|